Is your Whirlpool side-by-side refrigerator’s water tasting off or flowing slower than usual? It might be time to change your water filter.
But don’t worry—replacing the filter is easier than you think. In this guide, you’ll learn exactly how to change your Whirlpool water filter quickly and hassle-free. By following these simple steps, you’ll enjoy clean, fresh water every time without the stress.
Keep reading to find out how to keep your fridge running smoothly and your water tasting its best.
Credit: www.famoustate.com
Locate The Water Filter
Changing the water filter in your Whirlpool side-by-side refrigerator keeps your water clean. Finding the filter is the first step before you replace it.
This guide helps you locate the filter easily. You will learn where the filter is and what type it is.
Check The Filter Position
The water filter can be in different spots depending on the model. Common places include inside the fridge or at the base.
- Look in the upper right corner inside the refrigerator compartment.
- Check at the bottom grille in front of the fridge.
- Some models have the filter behind the grille inside the fresh food section.
- Other filters are located inside the freezer compartment.
Identify The Filter Type
Whirlpool uses different water filter types. Knowing the type helps you buy the correct replacement.
| Filter Location | Filter Type | How to Recognize |
| Upper right inside fridge | Push-in cartridge | Round shape, inserts directly into the filter housing |
| Bottom front grille | Twist-in filter | Twists out like a light bulb from the grille |
| Inside freezer compartment | Slide-in filter | Flat, slides out from a slot inside the freezer |
Credit: www.whirlpool.com
Prepare For Filter Replacement
Changing the water filter in a Whirlpool side-by-side refrigerator is simple. Preparation is key to ensuring a smooth filter replacement process.
Follow these steps to get ready for replacing the filter. Gather all necessary tools and turn off the water supply.
Gather Necessary Tools
Before you start, make sure you have the right tools. This will save you time and effort.
- Replacement water filter
- Small towel or cloth
- Bucket or bowl
These tools help prevent water spills and ensure a proper fit for your new filter.
Turn Off Water Supply
Turning off the water supply is important. It prevents leaks when removing the old filter.
Check that no water is flowing by dispensing water from the fridge. This ensures the valve is completely off.
Remove The Old Filter
Changing the water filter in your Whirlpool side-by-side refrigerator is important for clean water. Removing the old filter is the first step.
This guide explains how to safely take out the old filter from your fridge.
Release The Filter
Find the water filter inside your refrigerator. It is usually in the upper right corner or behind the grille.
To release it, press the release button or twist the filter counterclockwise. Use gentle force so you do not break it.
- Locate the filter housing
- Press the release button or twist the filter
- Pull the filter out carefully
Dispose Of The Old Filter
After removing the old filter, place it in a trash bag. Do not reuse the old filter as it can cause water problems.
Check if your local recycling center accepts water filters. Otherwise, throw it away with your regular trash.
- Put the old filter in a sealed bag
- Check local recycling rules
- Dispose of it properly to keep your home safe
Credit: www.whirlpool.com
Install The New Filter
Replacing the water filter in your Whirlpool side-by-side refrigerator keeps your water clean. Follow these steps to install the new filter correctly.
Make sure you handle the filter carefully to avoid damage. This guide will help you insert the new filter and flush the system for fresh water.
Insert The New Filter
Take the new filter out of its packaging. Align it with the filter slot inside the refrigerator. Push the filter in firmly until it clicks into place. This ensures a tight seal and proper water flow.
Flush The Water System
After installing the new filter, flushing the water system removes air and loose particles. This makes your water clear and tastes better.
- Open the water dispenser and run water for 3 to 5 minutes.
- Collect the water in a container or let it drain into the sink.
- Discard the first few batches of water to clear impurities.
- Check for any leaks around the filter area.
- If leaks appear, remove and reinstall the filter securely.
Frequently Asked Questions
How Often Should I Change The Water Filter In My Whirlpool Fridge?
Change the filter every 6 months or when water flow slows or taste changes.
Where Is The Water Filter Located In A Whirlpool Side-by-side Fridge?
The filter is usually inside the fridge, in the upper right or bottom grille.
How Do I Remove The Old Water Filter Safely?
Turn off water, twist the filter counterclockwise, and pull it straight out gently.
Can I Use Any Replacement Filter For My Whirlpool Fridge?
Use only filters approved by Whirlpool for best fit and water quality.
What If Water Leaks After Changing The Filter?
Check the filter is fully inserted and twisted tight to prevent leaks.
Conclusion
Changing the water filter in your Whirlpool side-by-side refrigerator keeps water fresh and clean. It only takes a few easy steps. Regular replacement prevents bad taste and clogs. You save money by avoiding repairs. Always check the filter type before buying a new one.
Keep track of the change date for future reference. Clean water helps your family stay healthy. Simple maintenance extends your fridge’s life. Start today and enjoy crisp, clear water every day.
Last Updated on January 8, 2026 by Eric B. Steele